an oplink company s0314. rev.02 (web). 2012-11-15 contact ? 46335 landing pkwy ? fremont ? ca ? 94538 ? tel : +1 (510) 933-7200 ? fax : +1 (510) 933-7300 ? email : sales@oplink.com ? www.oplink.com ? product description cfpxxl4l2c 000 o3g pb the cfpxxl4l2c000o3g transceiver is a hot pluggable fber optic transceiver in the cfp form factor with digital diagnostics monitoring functionality (ddm). supporting 40gbase-lr4 ethernet standard and out-3 rates makes it ideally suited for 40g applications where cost efective high port density is needed. the control and status reporting functions are integrated into the design via a set of non-data hardware signal pins and management date input/output (mdio) interface per the cfp multi-source agreement (msa) management interface specifcation draft 1.4. the transceiver supports 40gbps data rate over four wavelength division multiplexed lanes. the four lanes are at 1271nm, 1291nm, 1311nm, and 1331nm wavelength respectively. each lane transmits and receives data streams at data rate up to 11.146gbps. it provides an excellent solution for 40gbps data transmission over up to 10km single mode fber. the low power consumption and excellent emi performance enable system design with high port density. the product is designed and tested in accordance with industry safety standards. the transceiver is class i laser product per u.s. fda/cdrh and iec 60825-1:2007 & iec 60825-2:2004+a1+a2standards. the cfpxxl4l2c000o3g transceiver connects to standard 148-pin cfp connectors for hot plug capability. this allows the system designer to make confguration changes or maintenance by simply plugging in diferent transceivers without removing the power supply from the host system. the transmitter and receiver data interfaces are internally ac-coupled. lv-cmos transmitter disable control input and loss of signal (los) output interfaces are also provided. the transceiver can be conveniently assembled into and released from the host system through the railing system specifed in the cfp msa. the transceiver operates from a single +3.3v power supply over an operating case temperature range of -5c to +70c. the housing is made of metal for emi immunity. ? four (4) cwdm channels ? transmission distance up to 10km (sm fber) ? compliant to cfp msa ? compliant to 40gbase-lr4 specifcations ? multirate support to cover otu-3 rates ? status reporting and control functions through the cfp management interface ? power consumption <8w ? rohs 6/6 compliant features ordering information multirate 40gbase-lr4 cfp transceiver model name operating temperature optical connector norminal wavelength (nm) distance cfp1xl4l2c000o3g - 5c to +70c commercial angled 1271,1291,1311,1331 10km CFP2XL4L2C000O3G - 5c to +70c commercial straight 1271,1291,1311,1331 10km
|
